Used ecm
10-26-2026, (Subject: Used ecm ) 
Post: #8
RE: Used ecm
(10-24-2026 )Rawze Wrote:  The most common cause of premature ECM failures is excessive higher frequency vibrations on the engine.

This is usually because the crank shaft damper is not doing its job correctly any more.


Set a glass of water on top of the engine while idling and video record it. - then do the same after replacing the crank shaft damper with a new one.. make sure its an OEM crank shaft damper.


just the beer talkin'

Third damper since 2016. This one is 3 years old. But I did replace front motor mounts with poly at the same time.
replyreply
 Thanks given by: Rawze


Messages In This Thread
Used ecm - Mrkentee - 10-23-2026,
RE: Used ecm - mikkhh - 10-23-2026,
RE: Used ecm - Mrkentee - 10-23-2026,
RE: Used ecm - tree98 - 10-23-2026,
RE: Used ecm - Mrkentee - 10-23-2026,
RE: Used ecm - tree98 - 10-23-2026,
RE: Used ecm - Rawze - 10-24-2026,
RE: Used ecm - Mrkentee - 10-26-2026
RE: Used ecm - mikkhh - 10-26-2026,
RE: Used ecm - hookliftpete - 10-26-2026,
RE: Used ecm - Mrkentee - Yesterday,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.