| Cm871 Jake solenoids inop |
| 11-07-2026, (Subject: Cm871 Jake solenoids inop ) Post: #7 | |||
| |||
| RE: Cm871 Jake solenoids inop The Jake harness ohms out fine, but I noticed the pins were hardly sticking out at all. I wonder that is the issue… I was able to pull them out of the engine side a good 1/4”. Before they were almost flush… so I will be reassembling to retest. User's Signature: 2010 T2000, CM871, 13spd, 1.173m, tanker yanker Overhauled @ 927k | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Cm871 Jake solenoids inop - dhirocz - 11-05-2026, RE: Cm871 Jake solenoids inop - Rawze - 11-06-2026, RE: Cm871 Jake solenoids inop - dhirocz - 11-06-2026, RE: Cm871 Jake solenoids inop - dhirocz - 11-07-2026, RE: Cm871 Jake solenoids inop - Rawze - 11-07-2026, RE: Cm871 Jake solenoids inop - dhirocz - 11-07-2026, RE: Cm871 Jake solenoids inop - dhirocz - 11-07-2026 RE: Cm871 Jake solenoids inop - dhirocz - Yesterday, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.