| Cm871 Jake solenoids inop |
| 11-08-2026, (Subject: Cm871 Jake solenoids inop ) Post: #8 | |||
| |||
| RE: Cm871 Jake solenoids inop Just posting to say that was the issue. I don’t know why the pins were set so shallow in the Jake harness, but pulling them out of the connector to 1/4” did the trick. I also made a point to squeeze the connectors a bit tighter before pushing them back onto the solenoids. Took it over monteagle today without issue. User's Signature: 2010 T2000, CM871, 13spd, 1.173m, tanker yanker Overhauled @ 927k | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Cm871 Jake solenoids inop - dhirocz - 11-05-2026, RE: Cm871 Jake solenoids inop - Rawze - 11-06-2026, RE: Cm871 Jake solenoids inop - dhirocz - 11-06-2026, RE: Cm871 Jake solenoids inop - dhirocz - 11-07-2026, RE: Cm871 Jake solenoids inop - Rawze - 11-07-2026, RE: Cm871 Jake solenoids inop - dhirocz - 11-07-2026, RE: Cm871 Jake solenoids inop - dhirocz - 11-07-2026, RE: Cm871 Jake solenoids inop - dhirocz - 11-08-2026 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.