Braking assist

[SquareOne]

I know exactly what you're dealing with!

My International LT625 does that stupid $hit... absolutely can't stand it! Will randomly display 'Collision Imminent" and scare the hell out of ya, because you know there is nothing that can be done if it wants to stab the brakes.

Mine will typically do it late in the afternoon while heading East coming out of the Mobile tunnel on I-10. Almost as if it momentarily sees the tunnel shadow/ceiling against the bright sky as a hazard. Just like mentioned in the first post above -- bright sky with a shadow from something (like an overpass). It will also sometimes do it to me late at night if the reflection from a digital message board hits the radar just right.

Like Marek mentioned, you can change the cruise type to traditional within the ECM, but it will leave a constant warning on the dash and still will not solve the issue. The Bendix On-Guard is tied into the ABS module and will have a conflict with the ECM if the cruise is not set in the proper configuration. For me, maybe if I had the body control software (Diamond logic) maybe then I would have a chance at shutting it down. This would most likely be what you need as well... something to communicate with your truck modules and have the ability to change the configurations.

If someone has a suggestion, I too would love to hear it. This stupid a$$ system is straight up dangerous!