Increasing HorsePower -- What You Need To Know
01-22-2017, (Subject: Increasing HorsePower -- What You Need To Know ) 
Post: #40
RE: Increasing HorsePower -- What You Need To Know
Ok, I'll play too.
CM871
Stock 550hp 1850tq
CPL2919 with AV10098
KW T800 wide hood, pulling heavy haul. 175,000lbs average GVW.
RTLOO20918B
Eaton D46 pump model rear diffs with 4.30 rears

I know this is the big CPL, that was also used for the 600/2050.
Which OEM cal is the correct one for this truck model?

I know I could ask this offline, but lets let others learn too. Currently have @m*m^2 no HP increase overlay. IF I have hurt my motor and am goin home to rebuild it, it will have the liners set at .014-.015 and of course hand torqued head and very acute attention to detail during assembly.
Would you recommend MMing the OEM cal or go full custom tune?
I am looking for solid performance to move the weight without sacrificing longevity/reliability.
And of course, why?


User's Signature: Why? Why do I always ask "why?" Because I can't learn or help teach others with "'cause I said so..."
replyreply


Messages In This Thread
RE: Increasing HorsePower -- What You Need To Know - Hammerhead - 01-22-2017



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.