Using the Gear Lube |
02-24-2018, (Subject: Using the Gear Lube ) Post: #12 | |||
| |||
RE: Using the Gear Lube (02-20-2018 )Joesixpack Wrote: We just pulled a high hour ISX apart that's never had the gear oil treatment and all the bearing surfaces and gear train are flawless. Other than carbon blowing out all the cylinders and 3 broke top rings on the back 3 cylinders it's flawless....LOL Its too bad no one bothered to install a bypass filtration system on the engine when it was new to prevent those soot-packing problems. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Using the Gear Lube - bossboy2 - 08-22-2017, RE: Using the Gear Lube - Rawze - 08-22-2017, RE: Using the Gear Lube - wildpib - 02-16-2018, RE: Using the Gear Lube - bossboy2 - 02-19-2018, RE: Using the Gear Lube - Rawze - 02-19-2018, RE: Using the Gear Lube - bossboy2 - 09-27-2017, RE: Using the Gear Lube - MBlazevic - 09-27-2017, RE: Using the Gear Lube - Brock - 09-28-2017, RE: Using the Gear Lube - bossboy2 - 02-16-2018, RE: Using the Gear Lube - Joesixpack - 02-20-2018, RE: Using the Gear Lube - Rawze - 02-24-2018 RE: Using the Gear Lube - bossboy2 - 02-23-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.