Low engine speed during high pressure test
02-09-2018, (Subject: Low engine speed during high pressure test ) 
Post: #10
RE: Low engine speed during high pressure test
basically all the tool is is a cap off for the rail to eliminate the fuel connector and injector for 1 cylinder. You just cap one off and run it and see if the return flow gets less/stops bypassing. then put on 2 of the block offs then 3 and so forth until you find the bad injector/tube etc.
replyreply
 Thanks given by: Rawze , Rounded_nut


Messages In This Thread
RE: Low engine speed during high pressure test - Unilevers - 02-09-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.