| isx advice |
| 02-13-2018, (Subject: isx advice ) Post: #2 | |||
| |||
| RE: isx advice You should have done the rods and mains at 800k to prevent acceleration of wrist pin bushing wear. They are over-due at this point. Many ISX truck owners skip this and then wonder why a piston goes through the block at 1.1 - 1.2 mil miles with no warning due to wrist pin failure. -- you have been warned!. While your at it, you should read through this as well. It is a warning to see how worn out the head is. It starts at the section in the post "Checking worn out valve seats"... http://rawze.com/forums/showthread.php?t...66#pid9466 User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
isx advice - mikestrucks - 02-12-2018, RE: isx advice - Rawze - 02-13-2018 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.