Oil in exhaust

[Evotrucker]

(05-07-2018 )Chamberpains Wrote:  I like this guy's ambition. He reminds me of a younger me. Just remember to use a torque wrench and follow every single proper instruction when it comes to reassembling your engine. While you have those injectors out you may want to have them tested.

It wasn't that bad actually tearing it down, I thought you would need some special tools for the injectors n so worth. Not really I did all of the tearing down with my tool bag which doesn't have much, bare minimum. Harber freight tools which probablt cost 100-150$.

Only thing that sucked was the oil pan.... and working on the gravel stone. The stones were eating into me. Sucked it up n just kept at it. Almost got the oil pan off, started to get the oil pump n sump of but the mechanics were closing the shop down.