| Electrical power loss-help |
| 06-30-2018, (Subject: Electrical power loss-help ) Post: #1 | |||
| |||
| Electrical power loss-help 2010 PB 386. Truck cut out. I got off the road. Checked wiring from batt to ecm. Replaced fuses. Swapped out ign batt feed fuse in cab. Disconnected inverter and heaters. Made it into truckstop. Code is intermittent power loss from ignition. Will start, and run but dies. If it sits a while, it will run a bit. That’s how I got in truckstop. Then it will start and shut right off. I let it idle for a while, and then it died. Is there a thermal switch somewhere? Does that sound like a short in a wire or connector? Help | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Electrical power loss-help - Mrkentee - 06-30-2018 RE: Electrical power loss-help - Nilao - 06-30-2018, RE: Electrical power loss-help - Mrkentee - 06-30-2018, RE: Electrical power loss-help - Brock - 06-30-2018, RE: Electrical power loss-help - Mrkentee - 06-30-2018, RE: Electrical power loss-help - Brock - 06-30-2018, RE: Electrical power loss-help - Mrkentee - 06-30-2018, RE: Electrical power loss-help - Brock - 06-30-2018, RE: Electrical power loss-help - Brock - 06-30-2018, RE: Electrical power loss-help - Chamberpains - 07-01-2018, RE: Electrical power loss-help - Mrkentee - 07-01-2018, RE: Electrical power loss-help - Brock - 07-01-2018, RE: Electrical power loss-help - Mrkentee - 07-01-2018, RE: Electrical power loss-help - Brock - 07-01-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.