| Electrical power loss-help |
| 07-01-2018, (Subject: Electrical power loss-help ) Post: #14 | |||
| |||
| RE: Electrical power loss-help Thinking about it, that is probably why mine didn't last...... I just cut open the glue and peeled the tin back. The electronic shop I dealt with said I probably bent and snapped the board inside. It's just a silicone sealant around it, I would use a heat gun and be very gentle to open it if I did it again. So long as you dont damage your outside, you'll get your core back if it doesn't work..... I beat the snot out of mine and still got my core. User's Signature: I'm no mechanic, I'm just a guy that breaks down enough to know a bit. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Electrical power loss-help - Mrkentee - 06-30-2018, RE: Electrical power loss-help - Nilao - 06-30-2018, RE: Electrical power loss-help - Mrkentee - 06-30-2018, RE: Electrical power loss-help - Brock - 06-30-2018, RE: Electrical power loss-help - Mrkentee - 06-30-2018, RE: Electrical power loss-help - Brock - 06-30-2018, RE: Electrical power loss-help - Mrkentee - 06-30-2018, RE: Electrical power loss-help - Brock - 06-30-2018, RE: Electrical power loss-help - Brock - 06-30-2018, RE: Electrical power loss-help - Chamberpains - 07-01-2018, RE: Electrical power loss-help - Mrkentee - 07-01-2018, RE: Electrical power loss-help - Brock - 07-01-2018, RE: Electrical power loss-help - Mrkentee - 07-01-2018, RE: Electrical power loss-help - Brock - 07-01-2018 |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.