Base timing help |
03-19-2019, (Subject: Base timing help ) Post: #1 | |||
| |||
Base timing help I have the pin and wedges. Turn the damper to insert pin. Pined the crank put my wedges in "4 injection cam" "6 valve cam". Ran the over head with 7mm on brake, .014 on intake, .027 on exhaust. Still getting a really bad knock when I started her. Went back pulled cam gears and did everything again just to make sure i did it right. But got the same knock. There is a mark on my damper the reads "TDC 1.6" should I be setting my cams with the damper on this mark? Please help | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Base timing help - Swaid25 - 03-19-2019 RE: Base timing help - Swaid25 - 03-19-2019, RE: Base timing help - hhow55 - 03-19-2019, RE: Base timing help - tree98 - 03-19-2019, RE: Base timing help - Swaid25 - 03-19-2019, RE: Base timing help - Unilevers - 03-19-2019, RE: Base timing help - Swaid25 - 03-20-2019, RE: Base timing help - Evotrucker - 03-19-2019, RE: Base timing help - Swaid25 - 03-20-2019, RE: Base timing help - Rawze - 03-20-2019, RE: Base timing help - Swaid25 - 03-22-2019, RE: Base timing help - Rawze - 03-22-2019, RE: Base timing help - Swaid25 - 03-23-2019, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.