ISX oil leak
08-14-2019, (Subject: ISX oil leak ) 
Post: #10
RE: ISX oil leak
(08-12-2019 )Rawze Wrote:  if you install any plates, you will need Unilevers or mommaburt to make a custom program. Otherwise, it will have a turbo derate all the time.

Also, a lot of those "kits" are not so good quality. I have seen many that come apart, crack, burn through, etc. after a few months or a couple years and take the turbo or engine out along with them.

Definitely want to have that done then. Do I need pull the cams & inspect bushings while front cover is off ? If the bushings were worn would it show signs on the rollers / rockers ?
replyreply


Messages In This Thread
ISX oil leak - TallBoy441 - 07-28-2019,
RE: ISX oil leak - RyanC - 07-28-2019,
RE: ISX oil leak - Rawze - 07-28-2019,
RE: ISX oil leak - Waterloo - 07-28-2019,
RE: ISX oil leak - TallBoy441 - 08-11-2019,
RE: ISX oil leak - Rawze - 08-11-2019,
RE: ISX oil leak - TallBoy441 - 08-11-2019,
RE: ISX oil leak - Rawze - 08-12-2019,
RE: ISX oil leak - TallBoy441 - 08-14-2019
RE: ISX oil leak - Waterloo - 08-14-2019,
RE: ISX oil leak - Baco74 - 08-14-2019,
RE: ISX oil leak - TallBoy441 - 08-14-2019,
RE: ISX oil leak - tree98 - 08-14-2019,
RE: ISX oil leak - TallBoy441 - 08-15-2019,
RE: ISX oil leak - Rawze - 10-07-2022,
RE: ISX oil leak - Baco74 - 08-14-2019,
RE: ISX oil leak - ov6b - 10-06-2022,
RE: ISX oil leak - Bengy88 - 10-06-2022,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.