ProStar CM871 Turbo (Before Milk2)

[D_Y_F_B_A_E]

(01-25-2020 )Rawze Wrote:  tbw: even if you plan on de-mandating it and gutting that system off it ...

YOU STILL NEED TO FIX THE DAMN ENGINE AND ITS CLOGGED UP SENSORS!!! -- THE ENGINE STILL USES/NEEDS MOST OF THESE SENSORS, like the imap, exhaust bp sensors, etc. FOR IT TO TO RUN PROPERLY!

Properly adjustng overhead valves,.. and all the rest of the neglect too.

Here is a Google Link to my engine photos and video-> https://drive.google.com/open?id=1312NN6...TA-W3N8ttb


The only sensor I've managed to clean so far is the IMAP sensor. It came out easily and had a few crumbs of soot on it that i brushed away. I reinstalled it, and still ordered a new one and an exhaust pressure sensor as well.

I've tried taking out the manifold to check that, but the bolt are on too tight to remove it by hand. I also tried removing the dpf, but the nuts on the clamps wont budge. I may have to take bolt-cutters to them and buy new ones. Though I prefer not to so that nothing looks out of place.

Photos of DPF-> https://drive.google.com/open?id=153e7Hn...PCBgxuGwE_