Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / CM 871 Timing

new reply
CM 871 Timing
02-03-2020, (Subject: CM 871 Timing ) 
Post: #1
Contributing Member2dlb Offline
Established   (32 Likes)  ****

 		Posts: 60
Joined: Oct 2019
Thanks: 163
Given 32 thank(s) in 18 post(s)
CM 871 Timing
Hi Guys
I have a question on timing. Picked up CM871 and noticed that the 4/6 on the valve cover had been changed to 4.25/6. So, i went to the origional owner and in his files found that this truck had a recent overhaul, In the paper work they discribed setting the timing, i have attached a picture and was wondering if this is the proper way to set the timing at overhaul. Is this the base timing method? Thanks for the help.   
Return to Top | find
replyreply
new reply


Messages In This Thread
CM 871 Timing - 2dlb - 02-03-2020
RE: CM 871 Timing - Rawze - 02-04-2020,
RE: CM 871 Timing - 2dlb - 03-12-2020,
RE: CM 871 Timing - Waterloo - 03-12-2020,
RE: CM 871 Timing - 2dlb - 03-14-2020,
RE: CM 871 Timing - Rawze - 03-14-2020,
RE: CM 871 Timing - 2dlb - 03-15-2020,
RE: CM 871 Timing - 2dlb - 03-14-2020,
RE: CM 871 Timing - Rawze - 03-15-2020,
RE: CM 871 Timing - 2dlb - 03-15-2020,
RE: CM 871 Timing - Rawze - 03-15-2020,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication