High idle settings?

new reply

Threaded Mode | Linear Mode

High idle settings?

02-20-2020, (Subject: High idle settings? )

Post: #10

sprayerman Offline

Established (3 Likes)

Posts: 26
Joined: Feb 2020

Thanks: 26
Given 3 thank(s) in 2 post(s)

RE: High idle settings?

(02-20-2020 )Mr Hagg Wrote: Look and see if PTO is disable. if so need to enable it and expand it and set max rpms to like 1650 or so then what ever you want set or resume to be the last 2 in that area

Ok... I'll check that. This ecm actually has several parameters that are labeled read only.

Return to Top | find

reply reply

« Next Oldest | Next Newest »

new reply

Messages In This Thread

High idle settings? - sprayerman - 02-19-2020,

RE: High idle settings? - Magard - 02-19-2020,

RE: High idle settings? - sprayerman - 02-19-2020,

RE: High idle settings? - sprayerman - 02-20-2020,

RE: High idle settings? - Rawze - 02-20-2020,

RE: High idle settings? - Magard - 02-19-2020,

RE: High idle settings? - JimT - 02-19-2020,

RE: High idle settings? - Lonestar10 - 02-20-2020,

RE: High idle settings? - Mr Hagg - 02-20-2020,

RE: High idle settings? - sprayerman - 02-20-2020

RE: High idle settings? - marek4792 - 02-20-2020,

RE: High idle settings? - sprayerman - 02-22-2020,

RE: High idle settings? - Curtisj28 - 02-21-2020,

RE: High idle settings? - Rawze - 02-21-2020,

RE: High idle settings? - JimT - 02-22-2020,

RE: High idle settings? - smorgan87 - 02-22-2020,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.