ISX running on one bank |
07-06-2016, (Subject: ISX running on one bank ) Post: #2 | |||
| |||
RE: ISX running on one bank Where's the fuel pressure at ? You say, you check the actuator coils resistance and did wiggle test . How about you pull the ECM connectors. Clean them really good and put some dielectric grease and be sure they make a reliable contact with pins !!! Also check all ground wires ! And when I say check I mean remove, clean both (wire and ground) , put dielectric grease and reinstall !!! Not only at the batteries but everywhere you can see ......and don't see ! | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
ISX running on one bank - manolumber - 07-06-2016, RE: ISX running on one bank - Wiseman - 07-06-2016 RE: ISX running on one bank - Mr Hagg - 07-07-2016, RE: ISX running on one bank - Wiseman - 07-07-2016, RE: ISX running on one bank - Rawze - 07-07-2016, RE: ISX running on one bank - manolumber - 07-07-2016, RE: ISX running on one bank - Rawze - 07-07-2016, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.