Shim for increased Oil Pressure

[Brock]

(07-19-2016 )Camstyn Wrote:  The pan is off mine right now.. With oil temp st 210 I was seeing 37-38psi at 1500rpm and about 23 at idle. How much shimming would be recommended? Bottom end has never been touched, 1,085,000km.. We may be rolling new bearings in.

Well they've been saying 10 dimes which is a half inch shim. hammer went conservative and used 7 dimes.

Incase of confusion. dimes refer to money. 10c dimes and not a shim type.