DA left speed sensor

[Geared_Cortex]

(07-23-2020 )Mr Hagg Wrote:  Im with Rawze if its in and out. Should have a drop out speed code... That is if your looking at wabco or bendix programs... It also could be voltage drop high/low which would mean you have a broken wire. The way I find them is take a ohm meter and wiggle the wires as I ohm them out.. If it drops out you know you have a broken wire.. Most of the time I find the issue to be either the sensor it self like 40% of the time and about 2 foot back from harness plug where it good into sensor.

Thanks
Wouldn't it drop a right side speed sensor fault if I unplug the right side ?