What oil and filters for cm2250?

[Brock]

(07-20-2016 )Waterloo Wrote:  Here is a fantastic link for oil... http://www.pqiamerica.com/June%202014/co...02015.html

Myself, I'm sticking with my Fleetguard filters, the newest out there, which just replaced the LF9080 for the ISX is the FL14000nn. The fuel filter is the FF2200, and the Davco 50 Micron filter FS19729. I have the 2008 CM871 in a ProStar. I don't recall the coolant filter, which is a blank cartridge.

As far as oil, I have been using Shell Rotella T 15W-40 conventional for quite a along time, but come the end of this year Shell is changing the formula yet again. So, I have decided to switch brands, going over to
Delo 400 LE 15W-40 Conventional.

From what I can figure, and having talked to a Delo rep, the 400 LE should be just fine with no plans to discontinue it or make any major changes anytime soon. One thing I like in regards to the 400 LE is the additive package, higher moly count than Rotella T, and it will not be changing any time soon according to the rep. Rawze has commented on the Delo 400 LE in the past, and had good words to say about it. I'm going Delo.

If you service your own truck, which I am going to start doing, the Delo 400 LE 15W-40 can be had at Walmart for $12.57 a gallon, or $28.49 for the 2.5 gallon jug. Grease, I am going with the Delo ESI grease.
Mobil 75W-90 synthetic in the gear boxes and transmission.

Hope this helps. And this is JUST MY OPINION! I know how these threads can go! LOL!!!

That's the same oil I switched too as well. It's a good oil at a great price. I can get a barrel for 650 bucks opposed to the 1350 I've been paying for my synthetic! of course my numbers are canadian funny money.