Main bearings |
09-12-2020, (Subject: Main bearings ) Post: #6 | |||
| |||
RE: Main bearings (09-12-2020 )redbeard Wrote: I think your good. We used to take a grey scotch brite pad and polish new bearings to help with break in I am hoping your referring to some older type of engine of days gone past that was known for improper fit bearings or something. On an ISX, the proper main/rod bearing clearance is 0.002" - 0.004" ... I would hope someone would not take a scotch-brite pad to one unless it was to achieve the right clearances, and had plastigauged everything before hand to ensure they needed to do such a drastic thing. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Main bearings - Mrt800 - 09-12-2020, RE: Main bearings - redbeard - 09-12-2020, RE: Main bearings - Mrt800 - 09-12-2020, RE: Main bearings - Rawze - 09-12-2020 RE: Main bearings - Aleeex - 09-12-2020, RE: Main bearings - Mrt800 - 09-12-2020, RE: Main bearings - Waterloo - 09-12-2020, RE: Main bearings - smorgan87 - 09-13-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.