Cam replacement cm2350 |
12-10-2020, (Subject: Cam replacement cm2350 ) Post: #6 | |||
| |||
RE: Cam replacement cm2350 Don't waste your time rebuilding the air compressor, for a couple hundred more get a quality reman, I found a good one at FleetPride, Haldex Genuine Cummins reman in the USA. $900 at the time, just bring in your old one as the core deposit is around $600. And make sure you remove ALL of the fittings off of the old compressor. The reason I say skip the new head rebuild, been there and done that, it lasted around 70,000 miles and I was putting on that new compressor. I would also install a new air dryer when you do the compressor, they have them reman or new, and the prices on most aren't much more than a new dryer cartridge. User's Signature: 2008 ProStar, OEM 600hp CM-871, 18spd, 3:42, in framed in Rawze's driveway. Every day is a fresh new episode of, "The Twilight Zone"... Rod Serling lives rent free in my head. I can smell the Chesterfields. | |||
|
« Next Oldest | Next Newest » |
Messages In This Thread |
Cam replacement cm2350 - SemiSweet - 12-10-2020, RE: Cam replacement cm2350 - Coronado126 - 12-10-2020, RE: Cam replacement cm2350 - SemiSweet - 12-10-2020, RE: Cam replacement cm2350 - Rawze - 12-10-2020, RE: Cam replacement cm2350 - SemiSweet - 12-10-2020, RE: Cam replacement cm2350 - Waterloo - 12-10-2020 RE: Cam replacement cm2350 - Rawze - 12-10-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.