Inframe

[Ricky]

(01-22-2021 )Rawze Wrote:  You can look at lifetime average engine load in insite. If it shows above 45% or so then it might be better to put the bigger injectors, pistons, and valve cam in but otherwise its not worth the extra expense (few thousand by the time you get injectors and have no cores to turn in) if ya ask me.

The engine will also be overall slightly less fuel efficient when you do this too when your not heavily loaded.

My ECM fried a little bit ago so I don't believe it will have much history. We could not get anything from the old ECM, had the steelership flash the new ECM. I bought a inline 6 and had my son setup a toughbook with windows 7. I'm not a computer person at all but my son is and he can't get it to work. He said he can get it to work if he changes the time on the laptop. But he said it doesn't stay working. I'm not a tech kinda person more hands on. I just did drives, brakes, drums and air bags in the driveway last Sunday.
As far as cams and injectors would the day I drop the truck off be to late to make a decision like that. Would Mr Haggi already have the parts ordered for the infame?