RIP CM2250, 2013, 800,000km 20,000 hrs
03-20-2021, (Subject: RIP CM2250, 2013, 800,000km 20,000 hrs ) 
Post: #50
RE: RIP CM2250, 2013, 800,000km 20,000 hrs
Alright, finally got insite and hooked it up. First thing I did was injector leakdown test, and this is on a newly rebuilt motor.. It failed. Dropped 9,000 PSI in 1 minute. Next thing i'm going to do is the cylinder cut out test the way Rawze shows. I also looked at the aftertreatment history, and below is what I got. Also looked at engine use history, but it's bene rebuilt since then and I've only had it for 1,000 or so hours. Anything else I should be doing at this stage to start investigating into the health of this boy. FYI - SCR replaced 100 hours ago. Getting a code consistently for low def pressure low (FC 3574).


replyreply


Messages In This Thread
RE: RIP CM2250, 2013, 800,000km 20,000 hrs - Hermjeji - 03-20-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.