Iron high in sample |
03-18-2021, (Subject: Iron high in sample ) Post: #1 | |||
| |||
Iron high in sample Just did an oil change and analysis, oil ran a little long on this change due to time( about 1k miles). Also had an overhead run on the engine with this change. Iron jumped from 17ppm (usually its about 8ppm) to 110ppm. I was expecting some additional contamination in silicon or lead maybe. Would this jump make sense on an overhead? Engine has been running same as usual. Replaced guts of fuel pump last spring. Will prob get time to check pump this werkend. Also, this is an ISC not ISX. | |||
« Next Oldest | Next Newest » |
Messages In This Thread |
Iron high in sample - hookliftpete - 03-18-2021 RE: Iron high in sample - Rawze - 03-18-2021, RE: Iron high in sample - hookliftpete - 03-18-2021, RE: Iron high in sample - hookliftpete - 03-18-2021, RE: Iron high in sample - Aussie Steve - 03-19-2021, RE: Iron high in sample - hookliftpete - 03-19-2021, RE: Iron high in sample - hookliftpete - 03-19-2021, RE: Iron high in sample - hookliftpete - 03-19-2021, RE: Iron high in sample - hookliftpete - 03-31-2021, RE: Iron high in sample - tree98 - 04-01-2021, RE: Iron high in sample - hookliftpete - 04-01-2021, RE: Iron high in sample - hookliftpete - 04-09-2021, RE: Iron high in sample - hookliftpete - 04-28-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.