| Timing set |
| 05-11-2021, (Subject: Timing set ) Post: #1 | |||
| |||
| Timing set The timing set I have will not seat with head and cam. The tab on the bottom hits the casting on the head before it seats. Once the crank pin is in the cam flat is in position, the alignment pin and some thickness gauges can be used to verify position. Has anyone else had this issue? Can I just grind the tab off the bottom? Thanks in advance. PS its a 2013 ISX 15 | |||
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Timing set - medicsaps - 05-11-2021 RE: Timing set - Chamberpains - 05-11-2021, RE: Timing set - Rawze - 05-11-2021, RE: Timing set - Rawze - 05-11-2021, RE: Timing set - Chamberpains - 05-11-2021, RE: Timing set - medicsaps - 05-11-2021, RE: Timing set - Chamberpains - 05-13-2021, RE: Timing set - Rawze - 05-13-2021, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.