Changing Pistons

new reply

Threaded Mode | Linear Mode

Changing Pistons

05-23-2021, (Subject: Changing Pistons )

Post: #4

Rawze

Forum Reject (13903 Likes)

Posts: 10,996
Joined: Jun 2013

Thanks: 5883
Given 13903 thank(s) in 6071 post(s)

RE: Changing Pistons

(05-23-2021 )RocketScott Wrote: A Cummins CPL 1280 is a 444xt. The ESN is 11535281

It's also been called an N14 mechanical, NTC-444, NH/NT 855...

Mr. Hag used to rebuild those old engines.. he was quite good at it... Maybe he, or perhaps someone else experienced will chime in with some advice.

Realistically, the higher compession ratio is the way to go if you can. Just remember that higher compression ratio requires a bit less boost to get the right fuel-air-mix on it back into spec.

Here are the part#s that it calls for...
./uploads/202105/post_2_1621786898_4bdcc0722894ed614e966fc37e8f034c.png

./uploads/202105/post_2_1621786898_4bdcc0722894ed614e966fc37e8f034c.png

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.

Return to Top | find

reply reply

Thanks given by:

RocketScott

« Next Oldest | Next Newest »

new reply

Messages In This Thread

Changing Pistons - RocketScott - 05-23-2021,

RE: Changing Pistons - Rawze - 05-23-2021,

RE: Changing Pistons - RocketScott - 05-23-2021,

RE: Changing Pistons - Rawze - 05-23-2021

RE: Changing Pistons - RocketScott - 05-23-2021,

RE: Changing Pistons - Nilao - 05-23-2021,

NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.