Ting / Metallic Sound
06-03-2021, (Subject: Ting / Metallic Sound ) 
Post: #4
RE: Ting / Metallic Sound
(06-03-2021 )kozakvod Wrote:  BTW, I found the SAME tensioner through PAI for $144 ...

not sure about the tensioner but PAI around here has been known to be nothing but pure engine garbage copmponents... just be fore-warned.

Don't trust those so-called "good reviews"... your drinking the cool-aide on that one.

here is a recent failure seen on one of their garbage dampers. This one was less than 2 years old...

   

   

The markings for A.B.C did not align quite correctly either on it. When I stacked it on top of an official cummins damper and aligned the pin position marks,... all three A,B,C were off by a few degrees.
./uploads/202106/post_2_1622743778_9c632cd0d0fd30789cee03800b935f01.jpg
./uploads/202106/post_2_1622743810_1524bf2225752c4c7df5855d5d3ee801.jpg
.. and Yes, I was looking at the stamped markings, not just what someone had painted on it.



--- and don't even get me started on their garbage overhaul kits.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: snailexpress , Waterloo , 74bassman , Toolguy


Messages In This Thread
RE: Ting / Metallic Sound - Rawze - 06-03-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.