Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / ISX Related Help / New crank damper

new reply
New crank damper
07-04-2021, (Subject: New crank damper ) 
Post: #16
W9L Offline
Established member  (14 Likes)  
 		Posts: 30
Joined: May 2021
Thanks: 4
Given 14 thank(s) in 7 post(s)
RE: New crank damper
Not a lot of room for a puller for a puller with the fan shroud 4 or 5 inches in front of it. How about the serpentine pulley is it mainly just bolted? Middle of this dampener is only about 3/16 to 1/4 inch thick so surely it won't take too much jarring with a dead blow to get off. May warp the old one but I will polish the crank boss up good before install.
Return to Top | find
replyreply
new reply


Messages In This Thread
New crank damper - earnies2 - 06-29-2021,
RE: New crank damper - Rawze - 06-29-2021,
RE: New crank damper - Rawze - 07-01-2021,
RE: New crank damper - W9L - 07-04-2021,
RE: New crank damper - Rawze - 07-04-2021,
RE: New crank damper - JimT - 07-04-2021,
RE: New crank damper - W9L - 07-04-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication