2350 intermittent fuel pressure issues

[Rawze]

(01-01-2023 )8pitcher Wrote:  ...
The cam gear spun slightly because I didn’t put lock tight on it. Didn’t think that it would matter that much....

It is very important... ALSO... it is just as important to use ONLY USE THE PROPER LOC-TITE-609... NOT ANY OTHER TYPE!. This is because loctite 609, unlike its cousin, 608 or other similar loctite liquids, 609 is specifically designed to fill the micron sized gaps on high-polished, friction fit surfaces.. and no other loctite is designed this way.

one of my rebuild series video talks about applying it properly so that it will not slip. It is about the 4 minute mark in the video...