Abs light international Lonestar

[Yauchout]

I resolved this issue. I figured I would update anyways in case somebody had a similar issue after having their hubs apart. I got this ABS light right after replacing the rear differentials I have conmet Preset hubs. They are torque to 300 foot pounds I torqued all of them to 300 foot pounds. Made sure the locking ears were engaged topped off my diff fluid and got the ABS light before even pulling out of the driveway. I ended up just pulling all the axle shafts again. Found that the left rear spindle nut completely stripped out. No threads at all. Left on the nut I'm not sure if there is a limit to how many times you can reuse the spindle nuts or if it was just bad luck. Either way, I replaced them all with brand new pro torque spindle nuts