Tools
09-27-2016, (Subject: Tools ) 
Post: #19
RE: Tools
(09-26-2016 )Signature620 Wrote:  Can anybody give a comparison between Snap On and IR 3/4" air impacts? I've seen countless Snap Ons that can barely make the torque-turn on ISX head and main bolts.

The only difference I can see is several hundred $$$ .
IR probably makes the snap on impacts, don't know that for a fact.

I've talk to a few guys that bring in piggyback tractors, all of them used the 3/4" IR to dismount and install tires. Good enough to get them on the ground, then final torque.


User's Signature: 2010 386 Pete CM871, 13 spd. 3.55
replyreply


Messages In This Thread
Tools - donaldray - 09-24-2016,
RE: Tools - Hammerhead - 09-24-2016,
RE: Tools - donaldray - 09-25-2016,
RE: Tools - Old Driver - 09-25-2016,
RE: Tools - Waterloo - 09-25-2016,
RE: Tools - arch stanton - 09-25-2016,
RE: Tools - Rawze - 09-25-2016,
RE: Tools - Hammerhead - 09-25-2016,
RE: Tools - Rig Wrench - 09-25-2016,
Batteries - donaldray - 09-25-2016,
RE: Tools - Waterloo - 09-25-2016,
RE: Tools - in2trux - 09-25-2016,
RE: Tools - Waterloo - 09-25-2016,
RE: Tools - Kevin7898 - 09-25-2016,
RE: Tools - donaldray - 09-25-2016,
RE: Tools - Rawze - 09-26-2016,
RE: Tools - Signature620 - 09-26-2016,
RE: Tools - in2trux - 09-27-2016
RE: Tools - Rawze - 09-27-2016,
RE: Tools - arch stanton - 09-26-2016,



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.