Increasing HorsePower -- What You Need To Know

[Rawze]

For an MM truck with AV10098 in it,... If you wanted to haul heavy and were geared for it to be in the 1600+ range when pulling hard like you should be,... custom liner height and head torque, etc.. and you could stand for having to do rods and mains at 600k instead of 800k ...

Max I would want to custom tune it to would be around 680 HP or so, but limit its torque below 1300 to about 1800 or so, and peak it at 1700 to 2100 ft-lbs of torque.

An example would be Something like this perhaps?...



I would also limit the boost to around 36-37 or so and let the EGT's run slightly higher just to protect liners and bottom end etc. a bit too.