Increasing HorsePower -- What You Need To Know
10-12-2021, (Subject: Increasing HorsePower -- What You Need To Know ) 
Post: #126
RE: Increasing HorsePower -- What You Need To Know
(10-12-2021 )lwilder27 Wrote:  I already know from my previous post that my CM2250's dont have an option for a higher calibration but I just checked one and found someone has already jumped CPLs. Can you tell me how bad it really is?

Valve cover shows ESN: 75013808 CPL: 3439 CAL and stamped on ECM : CL10073

What insite shows on the ECM is CL10062.45 CPL: 3438

Those 2 factory programs are 100% compatible with each other.

The only real differences are...

* The CL10073 does not have smart torque enabled and the CL10062 does.

* Actual power/torque for the CL10073 program is 385HP@1600 RPM and 1450Trq from 1080 - 1300 rpm.

* Actual power/torque for the CL10062 program is 430HP@1700 RPM and 1650Trq from 1100 - 1300 rpm. It drops down to the same 1450Trq from 1080 - 1300 rpm after 30 seconds when the smart torque kicks in.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply


Messages In This Thread
RE: Increasing HorsePower -- What You Need To Know - Rawze - 10-12-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.