| Factory cal file help |
| 03-27-2025, (Subject: Factory cal file help ) Post: #1 | |||
| |||
| Factory cal file help Hello. Im having problems with quickserve at the moment. Curious if someone can tell me what file this 2015ISX should have in it. Its a 450 engine someone has I'm sure put a 550 file in it. Engine Ser-7984237 Cpl-4583 Currently has ECM code-EF10106.26, PN-5317106, SN-4198682, CPL-4585 Thank you for any help! | |||
| 03-27-2025, (Subject: Factory cal file help ) Post: #2 | |||
| |||
RE: Factory cal file help (03-27-2025 )68shifter Wrote: Hello. Im having problems with quickserve at the moment. Curious if someone can tell me what file this 2015ISX should have in it. Its a 450 engine someone has I'm sure put a 550 file in it. your engne ser# is missing a digit. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| 03-27-2025, (Subject: Factory cal file help ) Post: #3 | |||
| |||
| RE: Factory cal file help 79874237 Sorry, fat fingered. Thank you. | |||
| 03-27-2025, (Subject: Factory cal file help ) Post: #4 | |||
| |||
RE: Factory cal file help (03-27-2025 )68shifter Wrote: 79874237 If you go to 'parts.cummins.com' and put in the ser# then it shows that it takes program EF10090. No login needed. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
| 03-27-2025, (Subject: Factory cal file help ) Post: #5 | |||
| |||
| RE: Factory cal file help Thank you! Didn’t know that route. | |||
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.