The excess cam wear mystery revealed.
03-04-2021, (Subject: The excess cam wear mystery revealed. ) 
Post: #12
RE: The excess cam wear mystery revealed.
(03-04-2021 )SergeyB Wrote:  This is how my cam looks at only 340k isx 2350
.



Looks like the typical ISX problems that happen due to neglect (mentioned in first thread post) to me.

one or more of...
=============

* Not adjusting the valves at 250k miles (or equilivnet engine hours).

...and/or...

* Allowing too much soot or wear metals to build up in the engine oil.

...and/or...

* Not changing the crank case filter often enough to ensure there is never any pressure buildup in the crank case.

===========

I take very good care of my engine. My overhead cam lasted me 1.38 million miles before #6 intake lobe finally started to flake. - I would say that I got my moneys worth. The Injector cam still looked pretty good, but I replaced everything on both any ways + all rockers and shafts.

Just goes to show that if the maintenance and care is kept after, things will last a really long time on an ISX.


User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
replyreply
 Thanks given by: Volvo8873 , amermextrucker


Messages In This Thread
RE: The excess cam wear mystery revealed. - Rawze - 03-04-2021



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.