CM2350 factory file comparrisons...

[KW660_16]

We already talked so we're good there. But for someone reading this. I totally agree that low rpm high torque (lugging) is bad. What I mean is if two engines have the same torque ratings but two different HP ratings I want the higher HP rating bc preferably with a lower torque rating actually bc where the ecm likes to produce power is at a higher rpm. I don't have any use for an engine that produces 2050lbft torque from 1100-1400rpm then dies off. Id rather have an engine that produces peak torque at 1400 rpm then SLOWLY reduces as you increase rpm. This is how you reliably produce power in an engine without destroying it.