Waterless Coolant systems...Good or Bad? |
02-25-2020, (Subject: Waterless Coolant systems...Good or Bad? ) Post: #10 | |||
| |||
RE: Waterless Coolant systems...Good or Bad? (02-25-2020 )E_83 Wrote: Rawze, Those are interesting ideas towards using a bit less water vs. the coolant ratio. Not mixing it 50/50 though would present some inefficiencies with heat transfer. How much loss in heat transfer vs. the goals for reduced boiling / liner damage over time possibilities is unknown. -- I still use a zero pressure system with the copper tubing to catch the overflow. I use the standard 50/50 (premixed) the red/water mix avail at all truck-stops. I just pour it in. My truck now has roughly 390,000 miles on the new liners with it set up this way. So far it works just fine for me. What it is doing to the liners is unknown at this time, so that is why it is still an open ended subject, and why I would not yet just blindly recommend it to others unless they understood that long term, it still might cause harm. User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
« Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.