2nd air gauge not working
04-12-2016, (Subject: 2nd air gauge not working ) 
Post: #21
RE: 2nd air gauge not working
A trick someone told me was blow some WD40 into compressor inlet to keep the unloader from sticking and clear soot from reed valve. Havent had to try it yet and shouldnt be a problem in the future since the soot monster was slain.


User's Signature: 2010 386 Pete CM871, 13 spd. 3.55
replyreply


Messages In This Thread
RE: 2nd air gauge not working - Unilevers - 03-26-2016,
RE: 2nd air gauge not working - in2trux - 04-12-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.