2nd air gauge not working
04-13-2016, (Subject: 2nd air gauge not working ) 
Post: #26
RE: 2nd air gauge not working
(04-13-2016 )Wiseman Wrote:  
(04-13-2016 )yamajason Wrote:  
(04-12-2016 )in2trux Wrote:  A trick someone told me was blow some WD40 into compressor inlet to keep the unloader from sticking and clear soot from reed valve. Havent had to try it yet and shouldnt be a problem in the future since the soot monster was slain.

There is an official Cummins procedure that involves spraying WD-40 into the compressor intake. Should take less than 30 minutes and worth a shot. It worked for some other old forum members.

I would do the same , cross my fingers until I get home and take an action toward fixing it the best possible way . I apologize to stevesparts for cluttering his original thread with answers not related to his question!

no problem everyone needs answers. :) still looking to fix mine. when i got some time:-/
replyreply


Messages In This Thread
RE: 2nd air gauge not working - Unilevers - 03-26-2016,
RE: 2nd air gauge not working - stevesparts - 04-13-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.