| Adding A/C & Heat to 36" sleeper |
| 01-07-2018, (Subject: Adding A/C & Heat to 36" sleeper ) Post: #6 | |||
| |||
| RE: Adding A/C & Heat to 36" sleeper I have espar d2 heater for 3 years. After 2 winters it started to show 52, 53 code "flame lost". And it didnt start from the first time like usually. Had to start it couple times then it started. So I took it apart and took flame tube had carbon in it. There are two ways to fix it. Replace the tube $120 or try to clean it. I replaced it now espar works like new again. User's Signature: Cascadia ISX15 CM2350 | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Adding A/C & Heat to 36" sleeper - Moose - 01-07-2018, RE: Adding A/C & Heat to 36" sleeper - iceman - 01-07-2018, RE: Adding A/C & Heat to 36" sleeper - hhow55 - 01-07-2018, RE: Adding A/C & Heat to 36" sleeper - Grizzly - 01-07-2018, RE: Adding A/C & Heat to 36" sleeper - stevesparts - 01-07-2018, RE: Adding A/C & Heat to 36" sleeper - simon999 - 01-07-2018 RE: Adding A/C & Heat to 36" sleeper - Moose - 01-07-2018, RE: Adding A/C & Heat to 36" sleeper - Vlad - 01-07-2018, RE: Adding A/C & Heat to 36" sleeper - hhow55 - 01-08-2018, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.