Helping Waterloo out with an inframe ...
04-27-2018, (Subject: Helping Waterloo out with an inframe ... ) 
Post: #96
RE: Helping Waterloo out with an inframe ...
Liners are officially installed! Inserted into block, torqued to 50 ftlbs, all measurements were .012 across the board. No deviation, a solid .012 at all areas checked... Pistons next...

It is now beer:30 ;-)
replyreply
 Thanks given by: BobsYourUncle , stevesparts , Brock , overshot , Hammerhead , zero4


Messages In This Thread
Caveat emptor - Waterloo - 04-09-2018,
RE: Helping Waterloo out with an inframe ... - Waterloo - 04-27-2018



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.