Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Rawze's Technical Documents / Fixing your EGR/DPF Problems...

new reply
Fixing your EGR/DPF Problems...
11-11-2016, (Subject: Fixing your EGR/DPF Problems... ) 
Post: #7
Rawze Offline
Forum Reject  (13903 Likes)  *******

 		Posts: 10,996
Joined: Jun 2013
Thanks: 5883
Given 13903 thank(s) in 6071 post(s)
RE: Fixing your EGR/DPF Problems...
(11-11-2016 )wreckmster Wrote:  Rawze, I need some clarification on this..I setup my forced regene monitoring like you showed in your regen video, but the KPA (is that supposed to be HPA?)readings arent there. The only available unit of measure for Differential Pressure are .inhg during monitoring. Where can I change the values, or where can I monitor the KPA/HPA.
Thanks for the site, and your videos are invaluable!

Look back in your regen history after it finishes. It should show the last regen and what the final value was to the far right for the history.

User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!.
Return to Top | find
replyreply
 Thanks given by: DVT873
new reply


Messages In This Thread
RE: Fixing your EGR/DPF Problems... - Rawze - 11-11-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication