Rawze.com: Rawze's ISX Technical Discussion and more / Big Truck Technical Discussion... / Rawze's Technical Documents / Fixed Vane vs Variable Geometry Turbochargers...

new reply
Fixed Vane vs Variable Geometry Turbochargers...
04-19-2016, (Subject: Fixed Vane vs Variable Geometry Turbochargers... ) 
Post: #5
Unilevers
Unregistered  ( Likes)  
 		 
Thanks:
Given thank(s) in post(s)
RE: Fixed Vane vs Variable Geometry Turbochargers...
(04-19-2016 )Rig Wrench Wrote:  I had an idea like this for a while.
I think I't would be the best of every world. Not for most, I assure you, but for my truck that only sees seasonal local work and competition use, I think it would be cool. Best of all worlds. Quick spool and response of the vgt, but the high charge flow of a large fixed vane. Should allow to be able to relax the sliding ring in the vgt, lowering back-pressure, yet still provide a large cfm of air without over spooling anything.
Just theory anyway

i want one!
Return to Top |
replyreply
new reply


Messages In This Thread
RE: Fixed Vane vs Variable Geometry Turbochargers... - Unilevers - 04-19-2016



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.
Theme by MyBB Addict
Contact Us | Rawze.com | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication