| Upping power |
| 02-25-2019, (Subject: Upping power ) Post: #1 | |||
| |||
| Upping power So I have a CM2250, factory 500hp ST. I know I will be needing an inframe relatively soon and as my average loads have gotten much heavier then they were when I had the truck built in 2011, I am interested in changing the internals to accommodate a higher HP tune. Maybe 550-600 nothing crazy. When the time comes I will most likely be doing the inframe myself so I am trying to gather as much info as possible before then. So my questions: How do I find out if my block, etc. would be compatible with the higher HP? Where would I go about finding a CPL of which parts would need to be changed? How would I locate part #’s for an upgrade, as my QS account and engine VIN won’t be of any help. Thanks in advance for all your ideas and suggestions User's Signature: Anti-seize EVERYTHING, Except injectors...Use Petroleum Jelly!!! | |||
| 02-25-2019, (Subject: Upping power ) Post: #2 | |||
| |||
| RE: Upping power User's Signature: ->: What I post is just my own thoughts and Opinions! --- I AM Full Of S__T!. | |||
|
| « Next Oldest | Next Newest » |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.