Different method to replace spring eye bushings...
04-23-2019, (Subject: Different method to replace spring eye bushings... ) 
Post: #1
Different method to replace spring eye bushings...
Cant ignore it much longer. I need to replace my front bushings soon. My truck uses the kind with a captured pin.

I could burn them out, but mine are kind of too close to the fuel tank for comfort.
I could remove the bracket from the frame entirely, but they also support the cab mounts, and after I press the old ones out, I still need to be able to press in new ones...
They have a captured pin, so all thread and spacers are out.
Tiger tools makes a nice unit, but they are pricey. And with my springs being new, I only have two to replace...trying to avoid taking it to a shop to have this done.
Anybody have an alternative method or replacing these bushings?


User's Signature: 2010 T2000, CM871, 13spd, 977k, tanker yanker
Overhauled @ 927k
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.