Isx 870 with 1.2 million miles 05 international

[tree98]

Rawze has an entire YouTube series about in framing an isx.

https://www.youtube.com/playlist?list=PL...Zc_5ZwzDiw

Are you mechanically inclined? Have you done a lot of mechanical work?
Your gonna need a counterbore cutter(around $2,500 for a new one) you'll also need a way to lift the cylinder head off and on the block, like a tow motor or build a gantry crane on wheels like Rawze has. Also a liner pulling tool to get the old liners out and a compressor to check the protrusion of the new liner. The cost of the special tools is probably about the same amount as you would pay in labor to have Mr. Hagg rebuild it for you, just throwing that out there.