ProStar CM871 Turbo (Before Milk2)
01-29-2020, (Subject: ProStar CM871 Turbo (Before Milk2) ) 
Post: #58
RE: ProStar CM871 Turbo (Before Milk2)
I just ordered some M14 1.5 to 1/8-27 npt fittings off amazon.

This one took about a week to arrive, but was cheaper:
https://www.amazon.com/gp/product/B00NWZ...UTF8&psc=1

This one was more expensive, had extra sizes that I don't currently need, but was delivered next day with prime shipping:
https://www.amazon.com/gp/product/B00UZ9...UTF8&psc=1

I also picked up these 90 degree fittings:
https://www.amazon.com/gp/product/B07HST...UTF8&psc=1

The Glowshift one came with a brass washer. Haven't tried that one, I ended up using the Bosch one (no washer) along with the o-ring from the original M14 plug along with some thread sealant.

No issues so far.


User's Signature: "...And as we wind on down the road, Our Shadows taller than our Soul..."
replyreply
 Thanks given by: D_Y_F_B_A_E


Messages In This Thread
RE: ProStar CM871 Turbo (Before Milk2) - JimT - 01-29-2020



NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.