where to tap in voltage meter
02-05-2020, (Subject: where to tap in voltage meter ) 
Post: #1
where to tap in voltage meter
On my Pete 335, the original owner did not spec it with a voltage meter. I'd like to add one when I put my pyro and boost on. Best to wire it directly off the main battery leads?
replyreply
02-05-2020, (Subject: where to tap in voltage meter ) 
Post: #2
RE: where to tap in voltage meter
I think that's exactly what I would do. That way your getting information right from the source.


User's Signature: im_seeing_parameters_in_my_sleep 1
replyreply
 Thanks given by: hookliftpete
02-05-2020, (Subject: where to tap in voltage meter ) 
Post: #3
RE: where to tap in voltage meter
At batteries is best. Or off starter stud as second choice. Make sure to fuse it at the source with at min a 1 amp fuse 10amp max


User's Signature: 2010 Lonestar - CM871 - 13sp - 3.70s, 2016 T680 - cm2350 - 13sp - 3.36s - skateboarder
replyreply
02-05-2020, (Subject: where to tap in voltage meter ) 
Post: #4
RE: where to tap in voltage meter
Conveniently the batteries are sealed agm and happen to be under the passenger seat. Would make it easy to wire into. Thanks!
replyreply




NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.