| Oil priming after internal engine work |
| 03-23-2020, (Subject: Oil priming after internal engine work ) Post: #7 | |||
| |||
| RE: Oil priming after internal engine work We used a 12 volt pump that Mr Hagg uses in his shop, he was nice enough to let me borrow for when we attempted the initial start after the in frame. Worked like a champ, plugged right in the oil circuit there by the oil filter. | |||
|
| « Next Oldest | Next Newest » |
| Messages In This Thread |
Oil priming after internal engine work - JMBT - 03-22-2020, RE: Oil priming after internal engine work - Nostalgic - 03-22-2020, RE: Oil priming after internal engine work - Chamberpains - 03-22-2020, RE: Oil priming after internal engine work - Nostalgic - 03-22-2020, RE: Oil priming after internal engine work - Lonestar10 - 03-22-2020, RE: Oil priming after internal engine work - Unilevers - 03-22-2020, RE: Oil priming after internal engine work - Waterloo - 03-23-2020 RE: Oil priming after internal engine work - Rawze - 03-23-2020, RE: Oil priming after internal engine work - JMBT - 03-23-2020, RE: Oil priming after internal engine work - JMBT - 03-23-2020, RE: Oil priming after internal engine work - Signature620 - 03-23-2020, |
NOTE: Rawze.com is not affiliated, nor endorses any of the google ads that are displayed on this website.